Wire rods (5.5 mm – 16 mm in diameter)

Steels for welding wires


These grades are produced according to ASTM, DIN, EN and TS standards. It is also possible to produce grades with some deviations in analysis on special request.

Selected scrap is charged to the electric arc furnaces in order to control the impurity elements such as Cu, Cr and Ni. Level of total impurities is kept minimum by adding Pig Iron and HBI to the scrap.
Eccentric bottom tapping and bottom purging systems are employed at the electric arc furnaces in order to control the slag amount and composition.
Silicon and manganese deoxidation is carried out.
Modification of the inclusions is achieved by Ca-wire injection method after the ladle treatment.
Billets are hot rolled in NKK/Japanese and VAI/U.K. finishing block mill with narrow tolerances both in size and shape.
Retarded cooling mode is achieved at the controlled cooling conveyor in order to reach the desired mechanical properties.
Surface oxide is suitable for mechanical descaling and chemical pickling.
Wire rods of 5.5 mm are compacted and secured automatically with four wire ties forming coils of approximately 1500 kg.
Two tags covering the details of the heat are attached.
Traceability of the product is ensured at all stages from tapping to after sale services with its specific heat number.
Certificates comprising chemical analysis and mechanical properties referring to the heat number are dispatched with delivery.